Error Messages - LG SIGNATURE LSWD100 Owner's Manual

Error Messages

Symptoms Reason
Water supply is not adequate in
area.
Water supply taps are not
completely open.
Water supply hose(s) are kinked.
The filter of the supply hose(s) are
clogged.
If water leakage occurred in the
aqua stop supply hose, indicator
will become red.
May vary depending on the model.
Load is too small.
Load is out of balance.
The appliance has an imbalance
detection and correction system. If
individual heavy articles are loaded
(e.g. bath mat, bath robe, etc.) this
system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the
end of the cycle, add smaller articles
of laundry to balance the load and
repeat the spin cycle.
Drain hose is kinked or clogged.
The drain filter is clogged.
Solution
• Check another tap in the house.
• Fully open tap.
• Straighten hose(s).
• Check the filter of the supply hose.
• Use the aqua stop supply hose.
• Add 1 or 2 similar items to help
balance the load.
• Add 1 or 2 similar items to help
balance the load.
• Rearrange load to allow proper
spinning.
• Rearrange load to allow proper
spinning.
• Clean and straighten the drain hose.
• Clean the drain filter.
EN
57