Table of Contents
Advertisement
How to Handle Freezing
• Make sure to empty the drum, pour warm
water of 50–60 °C up to the rubber part inside
the drum, close the door, and wait for 1–2
hours.
CAUTION
• Do not use boiling water. It may cause burns or
damage to the product.
• Open the cover cap and hose plug used for
removal of residual water to extract water
completely.
Drain filter
NOTE
• If water does not drain, this means the ice is
not melted completely. Wait more.
50-60 °C
Drain plug
• When water is removed completely from the
drum, close the hose plug used for removal of
residual water, choose a washing programme,
and press the Start/Pause button.
• When water supply problems occur, take the
following measures.
− Turn off the tap, and thaw out the tap and
both connection areas of inlet hose of the
product using a hot water cloth.
− Take out inlet hose and immerse in warm
water below 50–60 °C.
Supply hose
Drain hose
50-60 °C
EN
53
Advertisement
Table of Contents
