General Configuration; Changing Hotkeys; Choosing A Default Channel; Editing The Computer List - ADDER AdderView Pro 8 DVI User Manual

General configuration

Changing hotkeys

AdderView Pro 8 DVI units use
be changed if they clash with other software or hardware within the installation.
To change the hotkeys
1 Display the Configuration menu.
2 Highlight 'Setup Options' and press
3 Highlight 'Hotkeys' and press
combination. The options are: CRTL+ALT, CTRL+SHIFT, ALT+SHIFT, ALT GR,
LEFT ALT+RIGHT ALT, LEFT CTRL+LEFT ALT or RIGHT CTRL+RIGHT ALT.
4 Press to return to the 'Configuration Menu'.

Choosing a default channel

You can determine what the unit should do when it is first powered on, either
switch to a particular channel or display the on-screen menu.
To choose a default channel
1 Display the Configuration menu.
2 Highlight 'Setup Options' and press
3 Highlight 'Default Channel' and press
channel number (1 to 8) or 'OSD' if you would prefer the on-screen menu to
be displayed.
4 Press to return to the 'Configuration Menu'.
and as their standard hotkeys. These can
.
to select the required hotkey
.
to select either the required

Editing the computer list

To create/edit computer entries
1 Display the Display the Configuration menu.
2 Highlight 'Edit Computer List' and press
will be displayed.
ADDERVIEW PRO
Edit Computer List
Computer 01 01
Computer 02 02
Computer 03 03
Computer 04 04
Computer 05 05
Computer 06 06
Computer 07 07
Computer 08 08
Ins–Add Del–Delete
Enter–Edit X–Autoscan
–Select
F3–Find
Esc–Quit
3 Either:
• Create a new computer entry – Press
• Edit an existing computer entry – Highlight a computer name and press
. Press (Backspace) to delete existing characters and enter the
required new name (up to 16 characters).
Note: Avoid creating two names for the same computer channel. Avoid creating two names for the same computer channel.
4 Press and the cursor will move to the computer channel column. Change
or enter the channel address of the computer as required.
5 Optional: While the entry is highlighted, press
'x' marker at the right side - this will determine whether or not the
corresponding computer will be included autoscanning scan list - see
Autoscanning for more details.
6 When the channel address is complete, press
7 When all settings have been made, press
return to the 'Configuration Menu'.
. The 'Edit Computer List' menu
x
x
When an entry is marked with a
'x', the corresponding computer
x
will be included within an
x
autoscanning operation when
x
'SCAN LIST' is chosen as the
autoscan mode. See Autoscanning
x
for more details.
x
x
and enter a new name, or
to add/remove the
.
to save and exit. Press to