Cleaning And Maintenance; Technical Specifications - Omnitronic TM-215 User Manual

Pocket transmitter
Hide thumbs Also See for TM-215:
Table of Contents

Advertisement

Available languages

Available languages

If the microphone is not used, switch the transmitter off via the operation selector. If the presentation etc. is
over choose OFF. If the device will not be used for a longer period of time, remove the battery in order to
avoid battery leakage.

6. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the battery. Maintenance and service operations
are only to be carried out by authorized dealers.
In order to replace the battery please refer to "Inserting/exchanging batteries".
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

7. TECHNICAL SPECIFICATIONS

Antenna:
Carrier frequency:
Modulation:
Frequency stability:
T.H.D.:
Tone signal:
AF response:
Maximum deviation:
RF power output:
Power supply:
Current consumption:
Battery life:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 19.02.2009 ©
Rubber
UHF 750 - 850 MHz
FM
± 0,005 %
< 1 % at 1 KHz
32.768 KHz
50 - 15,000 Hz (± 3 dB)
± 48,000 Hz
10 mW max.
2 mignon-batteries (type AA)
approx. 65 mA, ± 5 mA
approx. 10 hours
97 x 64 x 24 mm
100 g
12/22
00026701.DOC, Version 1.1

Advertisement

Table of Contents
loading

Table of Contents