Hotpoint Ariston TCDG51XB Instruction Booklet page 25

The Display
Programme progress
The second line of the display shows the status of the programme as it progresses:
(long messages scroll across the line)
PRE CARE
DRY
COOL TUMBLE
END OF CYCLE, POST CARE PHASE
END OF CYCLE, EMPTY THE WATER BOTTLE
If the Mixed Dry option
been reached:
IRON DRY REACHED
HANGER DRY REACHED
Timed drying
After selecting a programme that has a Timed Dry option, press the Timed button
the selected time, each time you press and release the button (see Start and Programmes).
Delay and Time to End
Some programmes can have a delated start (see Start and Programmes). Press the Delay button
Each press of the Delay button
in 1 hour increments, from:
then after a couple of seconds cancels the delay.
The delay time is shown on the display next to the Delay button.
The display counts down the minutes of the delay period after
the Start/Pause button is pressed.
The second line of the display shows STARTS IN
After the delay period finishes (or for all of the programme if delay not selected): The estimated Time to End of the
programme for automatic programmes or the actual time remaining during the Timed programme is shown in this part of
the display.
(if option available and selected).
(if option
and selected).
is available and selected this line displays when the different dryness levels have
advances the delay setting
1h to 24h , then OFF and
available
Each press advances:
0:20
then , and then repeats.
Delicates have a maximum time of:
The bars to the right of the time, light to give an indication of
the time duration selected:
o:20 0:30 1:00 1:30
The selected time remains displayed after the programme
starts.
and the display will increment
0:30 1:00 1:30 2:00 2:40
1:40
2:00 2:40 3:00
and the icon flashes.
GB
3:00
25