Brewing Coffee; Tm Fe Ature; Keep Warm Function - Black & Decker CM1110B Use And Care Manual

12-cup programmable coffee maker
Table of Contents

Advertisement

Available languages

Available languages

BREWING COFFEE

1.
Open cover.
2.
Fill water reservoir with desired amount of water. The 12 line on the side
of the reservoir represents a full carafe of coffee. Do not fill past this 12
Cup line.
Note: Use spring water or filtered water. Distilled water lacks the minerals
necessary to bind to elements of coffee.
Note: Filtered water will limit impurities and excessive minerals that can
detrimentally impact coffee flavor and machine performance.
3.
Insert a basket type paper filter into the brew basket.
4.
Add desired amount of ground coffee. Close lid, making sure it clicks.
5.
Make sure carafe lid is properly attached to the empty carafe. Close the
carafe lid.
Note: Coffee may overflow if carafe lid is not properly placed.
6.
Place empty carafe on the carafe plate.
7.
If not already plugged in, plug power cord into an outlet.
8.
If regular brew strength is desired, your coffeemaker is set to brew coffee.
9.
If strong coffee is desired, press the STRONG button once to select
the strong brew. The LED light in the display next to STRONG will
illuminate. To turn STRONG mode off press the STRONG button again
and the LED light will turn off.
Note: We recommend using the STRONG setting to ensure the best flavor
whenever brewing 4 cups of coffee or less.
10. Press ON/OFF ( ) button and brewing begins. The ( ) button
illuminates while brewing.
11. Once coffee grounds have cooled, carefully open cover and, discard
used grounds. Close cover.
12. The coffeemaker will keep brewed coffee hot for 2 hours and then
automatically turn off.
To turn off the coffeemaker at any time press the ON/OFF button ( ). The
ON/OFF ( ) light goes off.
SNEAK-A-CUP™ FEATURE
Remove the carafe and brewing is paused. The carafe must be placed back
on the carafe plate in 30 seconds to prevent overflow. Brewing begins again.

KEEP WARM FUNCTION

The hot plate remains in "keep warm" mode for 2 hours (120 minutes)
following the brew cycle.
During this time the ON/OFF ( ) button remains illuminated.
After 2 hours have passed, the heater turns off and the ON/OFF ( )
light turns off.
To turn off the coffeemaker at any time press the ON/OFF button ( ).
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cm1110 series

Table of Contents