Lorex LNZ44P4 Series Instruction Manual page 22

6 Controlling the PTZ camera with LNR / NR Series NVRs
5. Move the camera into the desired end position and click End.
6. Right-click to return to the advanced PTZ controls window.
To run a pattern:
• Under No., select the number of the pattern you would like to go to and click
NOTE
• The camera's full panning range is 355°. However, we recommend you do not make the camera pan
more than 270° between any two points in a pattern.
• For instructions on how to control the PTZ camera using the smartphone or tablet app, refer to your
NVR's instructional manual.
#LX400075; r.45773/45962; en-US
.
19