Advertisement
Quick Links
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层
1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone,
Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China
电话/Tel: +86-755-29609320(8062)
传真/Fax: +86-755-25723423
邮箱/E-mail: godox@godox.com
http://www.godox.com
705-MS0000-00
Made In China
系 列 影 室 闪 光 灯
MS Series
Instruction Manual
说
明
手
册
Compact Studio Flash
Chinese English Bilingual
中英文双语
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Godox MS Series
Summary of Contents for Godox MS Series
- Page 1 系 列 影 室 闪 光 灯 MS Series Compact Studio Flash 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层 1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062)
- Page 2 Warning To prevent damage to the product or injury to you or to others, read the Thanks for choosing MS series studio flash. It is a lightweight, compact and following warnings in their entirety before using this product. Keep these durable flash with complete functions.
-
Page 3: Names Of Parts
LCD Panel NAMES OF PARTS Body PROP 1. Built-in 2.4G Wireless 8. Flash Output Transmission 9. Modeling Lamp is off 2. Built-in Wireless Channel 10. Modeling Lamp is in the PROP 3. Built-in Wireless Channel Dial mode 4. Slave Model Indicator 11. - Page 4 OPERATIONS When there is flammable accessory on the flash unit, do not keep the modeling lamp on for a long time. It is recommended to cool it down for one Flash Preparation minute after 10 minutes' working. 1. Take down the lamp cover. Install the modeling lamp and put on the Power Output Control glass protection cover and the...
- Page 5 Setting the Communication Channel Buzz Function The sound button is used for deciding whether there is sound reminder for ready flash after recharging. When the buzz indicator is on the LCD panel, the buzz function is working; when it is disappear, the buzz function is not working. A “BI” sound will be heard when it’s fully charged.
-
Page 6: Technical Data
Parameters output from 5V/200mA (only for Godox receiver) measures: -Reorient or relocate the receiving antenna. the USB port -Increase the separation between the equipment and receiver.
Need help?
Do you have a question about the MS Series and is the answer not in the manual?
Questions and answers