Forward MF12 is a mini macro flash. Warning Functionally, MF12 is equipped with two flash modes: TTL automatic flash mode and M manual flash mode. With S1 / S2 secondary optic triggering mode, no additional Names of Parts command signal or external remote control, direct trigger flash, convenient. Allocated...
Warning Names of Parts Body Always keep this product dry. Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. Keep out of reach of children. Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, electric shock may occur if you touch the electronic parts inside it.
Test Button Manual x1 Bag x1 Set Button Note: MF12 Two-light Kit is not only including above items but also including 1 unit MF-AR Adapter 7. Select Dial Ring and 8 pieces lens adaptor rings (Diameters of 49mm,52mm,55mm,58mm, 62mm,67mm,72mm, 77mm).
Page 13
MF-AR adapter ring. • How to Use Adapter Ring (Optional) 4. Attach the adapter ring onto the camera 1. Aim the socket of MF12 into the sliding lens. block and push it until a“click” can be heard. One adapter ring can install 6 lights at most.
1 grid Flash Mode Selection Blank grid Low battery, please recharge it. MF12 flash has two modes: TTL autoflash and M manual is displayed The battery level is going to be used out immediately. And the flash will auto C.Fn Ver 0.5...
With built-in Godox 2.4G wireless X system, this MF12 can be used in combination with and 1 step increment. Godox X1, XPro and X2 trigger. As a auxiliary unit, MF12 can be compatible with Canon, 1. Choose M and press the <...
Manual flash Auto flash PHOTOC S1/S2 Light The Reason & Solution of Not Triggering in Godox 2.4G Wireless controlled flash S1 Secondary Optic Triggering S2 Secondary Optic Triggering with Anti-preflash 1. Disturbed by the 2.4G signal in outer environment (e.g. wireless base station, 2.4G wifi...
- Shut down the device immediately should abnormal operation be detected. Model Mf12 - Avoid sudden impacts and the product should be dedusted regularly. - It is normal for the light beads to be warm when in use. Avoid continuous flashes if unnecessary.
Page 19
Thank you! institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is...
Need help?
Do you have a question about the MF12 and is the answer not in the manual?
Questions and answers