Setup - Hoshizaki DKM500BAH Instruction Manual

D. Setup
1) Install the leg protectors to the 4 adjustable legs, then attach the legs to the bottom of
the icemaker. See Fig. 2.
2) Position the icemaker in the selected permanent location.
3) Level the icemaker in both the left-to-right and front-to-rear directions. Adjust the legs to
make the icemaker level.
4) NOTICE! If the normal operating ambient temperature is above 90°F (32°C),
remove the compressor insulation cover.
Front Panel
Screw
Connector
Control Box
Adjustable Leg
Leg Protector
Fig. 2
12
Side Panel (Lower)
(removed in illustration
for clarity)
Compressor Insulation Cover