Table of Contents
Advertisement
Available languages
Available languages
11.
Remove and transfer
hinge hole plugs
Use a small, flat-blade screwdriver to gently remove 4 hinge
hole plugs on left side of dryer cabinet. Transfer plugs into
hinge holes on opposite side of dryer cabinet.
12.
Insert screws in hinge holes
on dryer cabinet
NOTE: Two people may be needed to reinstall door.
Insert screws into the bottom holes on left side of dryer
cabinet. Tighten screws halfway. Position door so large
end of door hinge slot is over screws. Slide door up so
screws are in bottom of slots. Tighten screws. Insert
and tighten top screws in hinges.
13.
Check door strike alignment
Close door and check that door strike aligns with door
catch. If it is needed, slide door catch left or right within
slot to adjust alignment.
TROUBLESHOOTING
See the Use and Care Guide or visit our website and
reference "Frequently Asked Questions" to possibly
avoid the cost of a service call.
21
Advertisement
Table of Contents
