Table of Contents
Advertisement
● Extension cable with connectors on both ends: 1 pc.
Type
For emitter
5-core
For receiver
For emitter
8-core
For receiver
For emitter
12-core
For receiver
● Cable for series connection: 2pcs./set
Model No.
SFD-CSL005
SFD-CSL01
SFD-CSL05
SFD-CSL1
SFD-CSL5
SFD-CSL10
When using as a safety device for a press machine or paper shearing machine in Japan
● Protective tube: Refer to the table below
When using as a safety device for a press machine or paper shearing machine in Japan, always
attach the protective tube SFPD-A10 (option) to the cable.
(13mm)
© Panasonic Industrial Devices SUNX Co., Ltd. 2020
Model No.
SFD-CCJ10E-S
SFD-CCJ10D-S
SFB-CCJ3E
SFB-CCJ10E
SFB-CCJ3D
SFB-CCJ10D
SFB-CCJ3E-MU
SFB-CCJ10E-MU
SFB-CCJ3D-MU
SFB-CCJ10D-MU
Length
0.05m
0.1m
Use to connect the device in series.
0.5m
If this device is to be installed in an L-shaped layout configuration, we recom-
mend that an at least 0.1m long series connection cable be used.
1m
Common for emitter / receiver
5m
10m
L
Length
Use to extend a 5-core cable.
10m
Both ends of the cable are connectors.
For emitter: Gray connector
10m
For receiver: Black connector
3m
Use to extend an 8-core cable.
10m
Both ends of the cable are connectors.
For emitter: Gray connector, Shielded cable
3m
For receiver: Black connector, Shielded cable
10m
3m
Use to extend an 12-core cable.
10m
Both ends of the cable are connectors.
For emitter: Gray connector, Shielded cable
3m
For receiver: Black connector, Shielded cable
10m
Remarks
WARNING
Remarks
(Inner diameter ø9mm)
Options
143
Advertisement
Table of Contents
Troubleshooting
