Friedrich C24YJ Owner's Manual page 8

Product Introduction
Wireless Remote Controller
1
2
3
4
5
6
7
8
9
Operation Mode
Cooling Mode
Auto Mode or Auto Changeover
Dehumidification mode
Heating Mode
• Cooling Model( ), Heat Pump Model(
8 Air Conditioner
ENERGY SAVING Button
Used to set or clear Energy saving.
FAN Button
Used to select Fan mode.
ON/OFF Button
Used to turn on/off the unit.
SURGE Button
Speed cooling operates super high fan speed.
10
LEFT/RIGHT AIRFLOW Button (OPTIONAL)
11
Used to set the desired left/right(horizontal)
12
airflow direction.
UP/DOWN AIRFLOW Button
13
Used to stop or start louver movement and set
the desired up/down airflow direction.
14
ON TIMER Button
15
Used to set the time of starting operation.
16
SLEEP TIMER Button
Used to set the time of sleeping operation.
17
SET / CLEAR Button
Used to set/clear the timer.
Used to set the current time(if it input for 3sec.)
AUTO CLEAN Button
Used to set or clear Auto clean.
ROOM TEMPERATURE SETTING Button
Used to select the room temperature.
OPERATION MODE SELECTION Button
Used to select the operation mode.
INDOOR FAN SPEED SELECTION Button
Used to select fan speed in four steps low,
medium, high and chaos.
ROOM TEMPERATURE CHECKING Button
Used to check the room temperature.
OFF TIMER Button
)
Used to set the time of stopping operation.
TIMER SETTING(Up/Down)/LIGHT Button
Used to set the timer.
Used to adjust the brightness.(if it is not time
adjust mode)
RESET Button
Used to reset the remote controller.