Lenovo ThinkSystem SR650 V2 Reference page 49

User Action:
Information only; no action is required.
• FQXSPFW0000N: The System [ComputerSystemElementName] encountered a POST Error.
This message is for the use case when an implementation has detected a Post Error.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0184
User Action:
This is a UEFI detected event. The UEFI (POST) error code for this event can be found in the logged XCC
message text. Please refer to the UEFI (POST) error code in the "Messages" section of the Information
Center (https://thinksystem.lenovofiles.com/help/index.jsp) for the appropriate user response.
• FQXSPFW2000I: The System [ComputerSystemElementName] has detected a POST Error
deassertion.
This message is for the use case when an implementation has detected that Post Error has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0185
User Action:
Information only; no action is required.
• FQXSPFW2001I: The System [ComputerSystemElementName] has detected a POST Error
deassertion.
This message is for the use case when an implementation has detected that Post Error has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0185
User Action:
Information only; no action is required.
• FQXSPIO0003N: A diagnostic interrupt has occurred on system [ComputerSystemElementName].
This message is for the use case when an implementation has detected a Front Panel NMI / Diagnostic
Interrupt.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
.
Chapter 2 XClarity Controller events
45