Advertisement
y DEFOG : You can use the defog mode to allow the camera to automatically
detect the fog density of the screen and display a clear image despite
smog, fog or general poor visibility.
❶MM I f the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
'DEFOG'.
❷MM S elect a desired mode using the
Function Setup switch.
- AUTO : Adjust the level automatically.
- Manual : Depending on the defog level set by the user, adjust the clarity of image.
(LOW, MIDDLE, HIGH)
- OFF : Released state
M
`
If the defog mode is set to Auto, and if the amount of fog is reduced, the function level will be
also reduced. If you want to maintain the same level of defogging, set it to Manual.
`
If there is little fog and the manual fog level is high, the screen contrast can get high.
y PRIVACY : Mask an area you want to hide on the screen.
❶MM I f the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
'PRIVACY'.
❷MM S elect a desired mode using the
Function Setup switch.
- AREA : You can select up to 4
PRIVACY areas.
- MODE : Determines whether to use the
area selected in the AREA.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray.
- TRANSPARENCY : Adds or removes transparency from the masking area.
- TOP / BOTTOM / LEFT / RIGHT : Adjust the size and position of the selected area.
- RETURN : Return to the SPECIAL menu.
DEFOG
LEVEL
1.
RETURN
2.
PRIVACY AREA SETUP
AREA
1.
MODE
2.
MASK COLOR
3.
TRANSPARENCY
4.
TOP
5.
BOTTOM
6.
LEFT
7.
RIGHT
8.
RETURN
9.
MIDDLE
AREA
1
OFF
GREEN
OFF
I
10
I
IIIIIIIIIIIIIIIIIII
I
IIIIIIIIII
IIIIIIIIII
50
I
IIIIIIIIII
IIIIIIIIII
10
I
40
IIIIIIIIII
IIIIIIIIII
English_25
Advertisement
