Advertisement
Select the function
1. PROFILE
using the Function
Setup switch.
1. Press the Function Setup switch.
y Main SETUP menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
y Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select 'EXIT' and press the Function Setup switch.
M
`
An item with the
icon and press the Function Setup switch.
`
An item with the --- icon is unavailable due to function settings.
PROFILE
1. When the SETUP menu screen is displayed, select 'PROFILE' by using the Function
Setup switch so that the arrow indicates 'PROFILE'.
2. Select a desired mode using the
Function Setup switch according to
the picture display you want.
y BASIC : The most common envi-
ronment is set to meet.
y DAY/NIGHT : It will be set
automatically so it
optimizes to the day
or night conditions,
respectively.
y BACKLIGHT : It will be set automatically so you can distinguish the object from
y ITS : It will be set automatically so you can easily check the traffic conditions.
MAIN SETUP
2. D-WDR
3. WHITE BAL
4. EXPOSURE
5. BACKLIGHT
6. SPECIAL
7. EXIT
icon also has sub menus. To select a sub menu, select an item with the
the background in a severe backlighting scene.
BASIC
Change the status
using the Function
ON
Setup switch.
ATW
OFF
SAVE
MAIN SETUP
1. PROFILE
2. D-WDR
3. WHITE BAL
4. EXPOSURE
5. BACKLIGHT
6. SPECIAL
7. EXIT
BASIC
ON
ATW
OFF
SAVE
English_17
Advertisement
