Advertisement
`
In D-WDR mode, there can be noise between a bright and dark area.
M
`
Depending on light conditions, unnatural changes or symptoms can occur on the screen so
deactivate the user mode.
White Bal (White Balance)
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select 'White Bal' by using the
Function Setup switch so that the arrow indicates 'White Bal' .
2. Select a desired mode using the
Function Setup switch.
Select one of the following 5 modes,
❈
as appropriate for your purpose.
y ATW : Select this when the color
temperature is between 1,800K and 10,500K.
y OUTDOOR : Use it in a color temperature range of 1,800K to 10,500K.(including
Natrium). Auto adjustment is made to optimize the camera color to
the outdoor environment.
y y y I NDOOR : Select this when the color temperature is between 4,500K and 8,500K.
Automatically adjusts the camera color for optimization to the indoor
environment.
y MANUAL : Select this to fine-tune White
Balance manually. Set White
Balance first by using the
ATW or AWC mode. After
that button to MANUAL
mode, fine-tune the White
Balance and the Function Setup switch.
y AWC➝SET : To find the optimal luminance level for the current environment, point the
camera towards a sheet of white paper and press the Function Setup switch.
If the environment changes, readjust it.
MAIN SETUP
1. PROFILE
2. D-WDR
3. WHITE BAL
WB MANUAL
1. RED GAIN
2. BLUE GAIN
3. RETURN
BASIC
ON
ATW
I
110
IIIIIII
IIIIIIIIIIIII
I
138
IIIIIIIIIIII
IIIIIIII
English_19
Advertisement
