Vivotek NR7401 User Manual page 6

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Status LED
The LED indicates the status of the Network Video Recorder�
LED
Power Green
Off
POE Green
Off
Status Green
Blinking red
HDD (Hard disk) Blinking green
Red
WAN On
Off
Blink
LAN1 On
Off
Blink
LAN2 On
Off
Blink
LAN3 On
Off
Blink
LAN4 On
Off
Blink
Hardware System Requirement
Computer:
■ Microsoft Windows XP Professional SP2 or above
■ Internet Explorer 6�0 or later
Hard disk:
SATA hard drive for up to 1TB
Hardware Reset
There is a indented reset button on the back panel of the Network Video Recorder� It is used to
reboot the Network Video Recorder or restore the Network Video Recorder to factory default�
Sometimes rebooting the Network Video Recorder could set it back to normal state� If the
problems remain after rebooted, restore the Network Video Recorder to factory default and
install again�
6 - User's Manual
Status
Power on
Power off
Normal
Power off / POE fail
Normal
Upgrading firmware
Hard disk is accessed
Hard disk full or error
With connection
No connection
Activity on WAN port
With connection
No connection
Activity on LAN port 1
With connection
No connection
Activity on LAN port 2
With connection
No connection
Activity on LAN port 3
With connection
No connection
Activity on LAN port 4
Indication