Trigger - Vivotek NR7401 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Trigger

This page allows Administrator to configure the Network Video Recorder to react in response
to particular event triggers� A typical reaction is that when a motion is detected by the network
camera, the Network Video Recorder sends buffered images to a FTP server or e-mail address
as notifications. You can configure up to 16 event triggers.
In the following illustration, an event can be triggered by many sources, such as motion
detection or external alarm (digital input devices). When an event is triggered, you can specify
what kind of action should be performed� You can assign the Network Video Recorder to send
snapshots (�jpg) or �txt document to your e-mail address or FTP site�
Event Trigger
ex. Camera Disconnected,
Motion detection on/off,
Alarm on/off (Digital input)...
■ Please configure the following items to please follow the steps below to add a new event trigger:
32 - User's Manual
Action
(what to do)
Media
(what to send)
ex. Snapshot or .txt file
NR7401
(what to do)
ex. Turn on/off Relay
(Digital output)
Server
(where to send)
ex. Email, FTP