Vivotek NR7401 User Manual page 12

9-channel monitoring and recording simultaneously network video recorder

Hide thumbs Also See for NR7401:

Table of Contents

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

WAN Settings Configuration

If you want to access the Network Video Recorder over the Internet, please go to Configuration

> Network to assign a WAN IP address (public IP) for NR7401. There are three ways to get a

WAN IP address: Privite DHCP (Dynamic IP), Static IP address, and PPPoE (DSL)�

Internet connection with private DHCP (dynamic IP)

Choose this connection type

server� Please follow the steps below to verify the settings:

1� Go to Configuration > Network� Click LAN > Get IP address automatically.

2� Click Apply to enable the settings�

3. If your computer is in the same domain with the WAN IP address, then you can use VIVOTEK

Installation Wizard 2 (IW2) to search for the Network Video Recorder easily.

Please follow the steps below to run IW2:

a. Install the IW2 under the Software Utility directory from the software CD.

Double-click the IW2 shortcut on your desktop to launch the program.

b� The program will conduct analyses on your network environment�

After your network environment is analyzed, please click Next to continue the program.

c� The program will start search for all VIVOTEK devices in the same LAN�

12 - User's Manual

to automatically obtain a dynamic IP address assigned by a DHCP

Table of Contents