Vivotek NR7401 User Manual page 20

9-channel monitoring and recording simultaneously network video recorder

Hide thumbs Also See for NR7401:

Table of Contents

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Manually install in WAN

When in WAN, you have to add a new device manually� Please follow the steps below:

1� Select Add new on the drop-down list

2� Enter the Device Name�

3� Enter the Username/Password if the device needs to do authentication�

4� Select the Device Type� Please refer to page 18 for support list�

5� Enter the MAC Address of the device in the format as xx:xx:xx:xx:xx:xx�

6� Enter the IP Address of the device� You can leave this blank empty if the IP address is assigned

automatically by the NR7401 server�

7� Enter the HTTP Port for the device�

8� Click Save to enable the settings�

NOTE

► If you want to modify the settings of the device, select it on the drop-down list.

The device information will be displayed in the following blanks, then you can modify the settings of

the device�

► By default, the recording schedule is "Always" (continuous recording)� If you want to modify the

recording schedule, please refer to page 27 for detailed information�

► By default, the recording policy is "Default" mode� If you want to modify the recording policy, please

refer to page 29 for detailed information�

► Alarms refers to digital input of the device; Relays refers to digital output of the device� These two

columns will not show up if the linked device does not have external DI/DO�

20 - User's Manual

Table of Contents