Advertisement

Quick Links

Legal Information
Warnings
Please pay attention to the tips within the manual so as to avoid personal injury or
property losses. The tips for personal injury are indicated in warning triangles while
the tips only related to property losses have no warning triangles. The warning tips are
listed as follows with the hazardous scale from severe to slight.
Danger
If handled carelessly, death or severe human injury will occur.
Warning
If handled carelessly, death or severe human injury might occur.
Caution
Warning triangle indicates that slight human injury might occur if handled
carelessly.
Note
Unexpected result or status might occur, if not handled according to the tips.
Professional Personnel
The product/system covered by the manual can only be handled by qualified and
professional personnel. During operation, please follow the respective instructive
manuals, especially the safety warnings. The professional personnel have been trained
and possess relevant experiences; therefore, he/she could be aware of the risks of the
product/system and avoid possible damages.
EVOC Product
Please pay attention to the following instructions:
Warning
EVOC product can only be used according to the descriptions within the manual,
including the contents and the relevant technical documents. If the products or
components from other companies are required, please get the recommendation
and grant from EVOC first. Proper transportation, storage, assembly, installation,
debugging, operation and maintenance are prerequisite to ensure product safety
and normal operation; therefore, please ensure permitted environment conditions
and pay attention to the tips within the manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NPC-8130 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EVOC NPC-8130

  • Page 1 Please pay attention to the following instructions: Warning EVOC product can only be used according to the descriptions within the manual, including the contents and the relevant technical documents. If the products or components from other companies are required, please get the recommendation and grant from EVOC first.
  • Page 2 Trademarks EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other product names mentioned herein are used for identification purposes only and may be trademark and/or registered trademarks of their respective companies.
  • Page 3 About this manual Scope of the Manual The manual is appropriate for EVOC NPC-8130. Convention The term “the PC” or “the Product” within the manual usually stands for EVOC NPC-8130. Instructions Safety instructions To avoid property losses or individual injury, please pay attention to the safety instructions within the manual.
  • Page 4 Safety Instructions General Safety Instructions Caution Before you have read related safety instructions, please do not expand your device. This device is compliant with related safety requirements. If you have any doubt about the effectiveness of installation in the planned environment, please contact your service representative.
  • Page 5 ESD Instructions The following label can be used to identify the modules that contain electrostatic sensitive devices: When operating the modules that contain electrostatic sensitive devices, please follow the instructions below:  When operating the modules that contain electrostatic sensitive devices, make sure to release static electricity on your body (for example, by touching a grounded object).
  • Page 6: Table Of Contents

    Contents 1. Product Introduction ....................1 1.1 Overview .......................1 1.2 Specifications ....................2 1.3 Operating Instructions ...................4 1.3.1 External Functions................4 1.3.2 Internal Layout ..................6 1.3.3 Operation Control................7 1.4 Status LED.....................7 2. Application Scheme ....................8 2.1 Transportation....................8 2.2 Storage......................8 2.3 Opening the Box and Initial Examination............9 2.3.1 Opening the Box................9 2.3.2 Markings for PC Identification............9 2.4 External Environment Conditions ...............10...
  • Page 7 5.2.2 Network Port ...................14 5.2.3 USB Port ..................15 5.2.4 VGA Port..................16 6. Software Introduction .....................17 6.1 BPI Overview ....................18 6.2 FMI Overview .....................20 6.3 eManager Software..................21 6.3.1 Operating Environment ..............21 6.3.2 Function...................22 6.3.3 Firmware Management..............25 7. PC Maintenance......................28 7.1 Removal/Installation of Hardware Assembly ..........28 7.1.1 Carry out Maintenance ..............28 7.1.2 Preventative Maintenance ...............28 7.1.3 Replacing Backup Battery ...............29...
  • Page 8: Product Introduction

    Product Introduction 1. Product Introduction 1.1 Overview NPC-8130 is a rack mount network application platform based on X86 architecture. The PC contains Intel® Atom™ J1900 processor, onboard 4GB DDR3 motherboard, and supports Windows7 and Linux (kernel abvove 2.6) operating systems.
  • Page 9: Specifications

    1 x RJ45 type CONSOLE port  2 x standard USB2.0 port External IO  2 x 1000Mbps LAN port (two electrical ports, two ports optical ports or four electrical ports can be expanded by configuration of different network modules.) · 2 · NPC-8130...
  • Page 10 GB/T 17626.5-2008 Surge(impact) immunity Level(2)  MTBF≥50000h ELIABILITY  MTTR≤0.5h Safety Meets basic requirements for GB4943  Anti-vibration: 5-15Hz, amplitude 0.5mm, Mechanical 15-200Hz/1.0g acceleration (power-on status) environmental  Anti-shock: 10g acceleration, 11ms duration adaptability  Noise:≤55dB NPC-8130 · 3 ·...
  • Page 11: Operating Instructions

    Note: This product can be safely used on two dofferent levels of height (2000m and 5000m above sea level), depending on the power supply contained in the product. 1.3 Operating Instructions 1.3.1 External Functions Front View of NPC-8130-01 Location Description RESET switch...
  • Page 12 Product Introduction Front View of NPC-8130-02 Location Description Bypass1 LED indicator Bypass2 LED indicator CONSOLE HDD LED indicator PWR LED indicator RESET switch NPC-8130 · 5 ·...
  • Page 13: Internal Layout

    Product Introduction Rear View of the PC Location Description Ground screw Power switch Power connector 1.3.2 Internal Layout Internal Layout of the PC Location Description Power adapter Electrical port board Motherboard System fan · 6 · NPC-8130...
  • Page 14: Operation Control

    On/Off button used to switch on/off the PC 1.4 Status LED Display Meaning Description Disconnected from power Displaying PC POWER status Green PC is operating No access Displaying hard drive status Yellow Being accessed NPC-8130 · 7 ·...
  • Page 15: Application Scheme

    Under this circumstance, please make sure no water drop (condensation) is formed on the surface or interior of the device. If condensation is formed on the device, please wait for over twelve hours before connecting the device. · 8 · NPC-8130...
  • Page 16: Opening The Box And Initial Examination

    When the product needs to be repaired or after it has been stolen, these codes can be used to identify the PC. Please do not rip them off. Serial number: located on the chassis body (as shown below) NPC-8130 · 9 ·...
  • Page 17: External Environment Conditions

    Please do not block the ventilation hole of the PC.  The installation position requirement for the PC should be always observed.  The connected or installed I/O should not generate reverse voltage of more than 0.5V inside the PC. · 10 · NPC-8130...
  • Page 18: Product Installation

    PC onto the cabinet Note: The PC must be placed on the supporting board or guiding rail. Do not fasten the PC only by the screws on the front panel. NPC-8130 · 11 ·...
  • Page 19: Pc Connection

    PC is powered off. 4.2 Product Grounding Low impedance ground connection is more helpful to release the interference produced by the external cables, the signal cables or the cables connecting the IO module to the grounding system. · 12 · NPC-8130...
  • Page 20: Connecting The Device To Power

    Danger Disconnect the power source and data cable during a lightning storm. Attention The PC is completely isolated from the power supply only by disconnecting the power connector. NPC-8130 · 13 ·...
  • Page 21: Debugging

    The PC motherboard provides two RJ45 connector 10/100/1000Mbps LAN ports, which have surge protection function. In addition, two electrical ports, two optical ports or four electrical ports can be expanded by configuration of different network modules. · 14 · NPC-8130...
  • Page 22: Usb Port

    LED is “off”; when there are broadcasting packages, it is normal if the ACTLED is “flashing”. 5.2.3 USB Port Two USB2.0 ports at front panel. Their pin definitions are as follows: Signal Name +5V_USB USB_Data- USB_Data+ USB1、USB2 NPC-8130 · 15 ·...
  • Page 23: Vga Port

    Debugging 5.2.4 VGA Port The PC provides one standard DB15 VGA port. Its pin definition is as follows: Signal Name Signal Name Green Blue DDCDATA HSYNC VSYNC DDCCLK · 16 · NPC-8130...
  • Page 24: Software Introduction

    Software Description Supported Range Name BIOS programming interface All supporting BPI specification, which provides motherboards and PCs of EVOC unified interface for software to company access hardware. A platform management All the motherboards/complete application software developed PCs that support BPI can run...
  • Page 25: Bpi Overview

    Software Introduction 6.1 BPI Overview EVOC BPI (BIOS Programming Interface) is a cross-platform, easy-to-maintain software interface specification, which supports access to hardware under the Protected Mode of 32-bit or 64-bit operating system and supports multi-process and multi-threading hardware access. BPI is a bridge between hardware and application software, and its purpose is to provide a unified standard interface for the application layer (in the form of library function, similar to library function of standard C).
  • Page 26 Security and High Reliability The BPI function library accessing the hardware is programmed by the motherboard developer and is strictly tested; therefore, it can avoid system malfunction caused by improper operation of the system hardware. NPC-8130 · 19 ·...
  • Page 27: Fmi Overview

    PC, total heart beat times of the CPU. eLog management information can provide valuable reference for failure analysis and product upgrade. BPI library address: please see “Software\Chinese\BPI” Or “Software\English\BPI” in the enclosed CD · 20 · NPC-8130...
  • Page 28: Emanager Software

    “Start”→“Program”→“EVOC” →“evoc_bpi_x”. 6.3 eManager Software eManager software is a device management platform software developed by EVOC. eManager software can be used for system operation abnormality monitoring, setup of GPIO input/output mode and electrical level, real-time monitoring of temperature, fan and voltage status.
  • Page 29: Function

    Watchdog. Exiting the program when Watchdog is counting down will also stop Watchdog. If “Automatically feed watchdog” option is selected, when the counted time is less than 3 seconds, Watchdog will be automatically fed. Function: Monitors whether the system can be normally operated, and carry out reset · 22 · NPC-8130...
  • Page 30 Software Introduction for abnormality. When abnormality occurs to the system, Watchdog cannot be fed automatically. After counting-down is finished, the system will restart, and recover from system error. 3. GPIO NPC-8130 · 23 ·...
  • Page 31 “Setup” button on the right. If it is a network-type motherboard, the special LED of the motherboard will also be displayed and can be set up. Function: Setup of GPIO and Network LED · 24 · NPC-8130...
  • Page 32: Firmware Management

    Method: After the software switches to hardware detection interface, it will automatically acquire temperature, fan speed, voltage and other information, refreshing at a 2S interval. Function: real-time acquisition of hardware operating status. 6.3.3 Firmware Management 1. HDD SMART NPC-8130 · 25 ·...
  • Page 33 HDD performance will be displayed in the list box. Function: To check SMART information related to HDD performance, which helps predict service life of HDD, and avoid data loss caused by damage to HDD. 2. Boot-up time · 26 · NPC-8130...
  • Page 34 The user can directly use eManager software for management of the device. If users intend to program software by themselves. Please refer to the complete routine of VB, VC, C++Builder, Delphi and BPI Programming Interface Operation Manual in the enclosed CD. NPC-8130 · 27 ·...
  • Page 35: Pc Maintenance

    To maintain relatively high system availability, it is recommended to preventatively replace the quick-wear parts. The table below give the time interval for replacement: Assembly Time Interval for Replacement 3 years CMOS backup battery 5 years · 28 · NPC-8130...
  • Page 36: Replacing Backup Battery

    3. Disconnect the PC from power source. Replacing Battery Steps to replace battery Open the PC Remove the motherboard. Note: place the motherboard on a desktop with anti-electrostatic protection. Press the clamp which fasten the battery, and remove the battery. NPC-8130 · 29 ·...
  • Page 37: Installing The Drivers

    If the time for battery replacement is over 30 seconds, the configuration data of the PC will be lost. In this situation, reconfiguration of BIOS Setup is needed. 7.2 Installing the Drivers Regarding the installation of driver program of this product, please refer to the enclosed CD. · 30 · NPC-8130...
  • Page 38: Dimensions Drawing

    This section includes the following dimensions drawings: Product Outline Dimensions Drawing Product Installation Dimensions Drawing Note: The unit in the dimensions drawing is usually millimeter. 8.2 Product Outline Dimensions Drawing 482.6 465.1 4x10.3 4x6.8 31.8 43.6 43.6 Unit: mm NPC-8130 · 31 ·...
  • Page 39: Product Installation Dimensions Drawing

    Dimensions Drawing 8.3 Product Installation Dimensions Drawing 482.6 465.1 4x10.3 4x6.8 31.8 Unit: mm · 32 · NPC-8130...
  • Page 40: Appendix

    2. Please check whether the Power cable or display display cable correctly cable is not connected connected with the display and the system unit. 3. Contact Technique Support if the screen remains black after implementing above measures. NPC-8130 · 33 ·...
  • Page 41 No system disk can The HDD power cable disk (the hard disk shall be found when or data cable is not installed with operating system powering on connected well bootable) well connected. · 34 · NPC-8130...
  • Page 42: Common Alarm Information Analysis And Solution

    Award BIOS motherboard. During Power The motherboard or complete PC is On Self Test (POST), the screen displays not connected to PS/2 or USB error information: “Keyboard error or no keyboard, and keyboard needs to be keyboard present”. connected properly. NPC-8130 · 35 ·...
  • Page 43: Esd Guideline

    ESD current may lead to potential problem of the module, or damage to the module which is not serious for the moment but may cause fault during operation. · 36 · NPC-8130...
  • Page 44 In this way, the dissipated electricity will not affect the ESD-sensitive device. Before handling the module, dissipate the electrostatic charges on your body. They can be dissipated by contacting grounded metal part. Make sure to use grounded measuring instrument. NPC-8130 · 37 ·...
  • Page 45: Abbreviations

    PC power consumption. Automation System After-sales Information ASIS System Advanced Technology Advanced Technology Attachment Advanced Technology Extended An America standard to American wire gauge differentiate wire diameter BIOS Basic Input/Output System BIOS code Controller Area Network · 38 · NPC-8130...
  • Page 46 Clear to Send Dynamic Random Access DRAM Memory Direct Current Direct Current Data Carrier Detect Data carrier signal detect Direct Memory Access Direct memory access Operating system without Disk Operating System graphic interface Distributed I/O German Certification body NPC-8130 · 39 ·...
  • Page 47 Architecture Expanded Memory Manager To manage expansion of memory Extended Memory 64 EM64T Technology European Norm Electrically Programmable Read -Only Memory/ EPROM/EEP sub-module Electrically Erasable EPROM/EEPROM chip Programmable Read-Only Memory Enhanced Parallel Port Two-way Centronics port · 40 · NPC-8130...
  • Page 48 Internet page Data transfer protocol on the HTTP Hypertext transfer protocol Internet Hardware Hardware Input/Output Data input/out of the computer Intel(R) Application Accelerator Integrated Drive Electronics International Electrotechnical Commission Integrated Graphic Device Ingress Protection Protection level NPC-8130 · 41 ·...
  • Page 49 Memory card in credit card Memory Card format Machine-readable product MLFB designation Micro Memory Card 32*24.5mm format memory card Multiple Point Interface Used for Programming Devices Microsoft Disk Operating MS-DOS System MTBF Meantime between Failure Multi-language User Language localization · 42 · NPC-8130...
  • Page 50 OLE for Process Control industrial process PATA Parallel ATA Personal PC Peripheral Component High-speed expansion bus Interconnect High-speed serial, differential Peripheral Component PCIe full-duplex PtP interface with Interconnect express high-speed data transmission rate Personal Computer Memory PCMCIA Card International NPC-8130 · 43 ·...
  • Page 51 Real Time Clock Reliable Transmission Request to send Service Receive Data Data transmission signal Serial Advanced Technology SATA Attachment Small Computer System SCSI Interface Synchronous Dynamic SDRAM Random Access Memory SELV safety extra-low voltage safety extra-low voltage circuit · 44 · NPC-8130...
  • Page 52 Asynchronous data transmission Transmit Data Data transmission signal Watchdog Time Monitoring time of Watchdog U.S. organization which carries out test and certification Underwriter Laboratories based on the standards of the Inc. country or two countries (using CSA/Canada) NPC-8130 · 45 ·...
  • Page 53 To enable the function which Intel Virtualization directly assigns the device (e.g. VT-D Technology for Directed I/O network adapter) virtual device. Windows 2000 Loss-free file format used for Wavelength encoding audio data Monitoring program using error Watchdog detection and alarm · 46 · NPC-8130...
  • Page 54: Terminology Glossary

    IDE port. CF card can be operated by connector and socket adapter, and other electronic components on the PCMCIA or IDE HDD controller are not needed. There are two kinds of design specifications: CF-I (42.6×36.4×3.3 mm) and CF-II (42.8×36.4×5 mm)。 NPC-8130 · 47 ·...
  • Page 55 This function supports bootup of the PC via LAN port. LPT port LPT port (Centronics port) is a parallel port used to connect printer. PATA The interface used for hard drive and optical drive, with up to 100Mbps parallel data transmission rate. · 48 · NPC-8130...
  • Page 56 PEG Port PCI Express used for graphics. A graphics port with 16 PCIe channels, used to expand graphics module. PIC mode Peripheral interrupt controller, having 15 interrupt lines. NPC-8130 · 49 ·...
  • Page 57 S.M.A.R.T Self-Monitoring, Analysis and Reporting Technology (SMART or S.M.A.R.T.) is an industrial standard integrated in memory media. This technology can be used to continuously monitor key parameters and detect upcoming problems at early stage. · 50 · NPC-8130...
  • Page 58 Copies of programs, data media or database, use to keep or protect key, irreplaceable, data, and prevent data loss when damage to a working copy occurs. Some application programs automatically generate backup copies of data files, and manage current or previous versions in the HDD. NPC-8130 · 51 ·...
  • Page 59 Memory card of credit-card format, the storage to store user programs and parameters (e.g. programmable module and CP). Reset Hardware reset: Using button/switch reset/reboot device. Formatization Storage space on the magnetic data media is primarily divided into magnetic track and · 52 · NPC-8130...
  • Page 60 Logically, EFI is located under the operating system, and is successive specification of device BIOS, mainly targeting 64-bit system. Controller Controller integrating hardware and software to control certain internal or peripheral devices (e.g. keyboard controller). NPC-8130 · 53 ·...
  • Page 61 RAID1 system with SATA RAID controller (onboard or slot module) and at least two SATA detachable supports. The advantage of hotswap is that faulty hard drive can be replaced without having to reboot the PC. · 54 · NPC-8130...
  • Page 62 Warm boot the computer (Ctrl + Alt + Del) without disconnecting power source. Motherboard Motherboard is the core part of a computer. Motherboard is used to process and store data, control and manage ports and device I/O. NPC-8130 · 55 ·...

Table of Contents