Manual Operation - Technibel MCAF98MR5I Operating Instructions Manual

01_MCAF78MR5I_EN.fm Page 13 Friday, November 2, 2007 2:28 PM

2. Manual Operation

OI-047-13-EG
Operation with the Remote Control Unit (continued)
STEP 4
STEP 5
NOTE
Check that the circuit breaker on the power panel is turned on.
If the automatic operation settings of the unit do not meet your needs, press
the setting buttons as described below and change the settings as desired.
STEP 1
Press the MODE selector button and select the desired
mode.
STEP 2
To start the air conditioner, press the ON/OFF operation
button.
STEP 3
Press the TEMP. setting buttons to change the temperature
setting to the desired temperature.
Adjustable temperature range:
STEP 4
Set the FAN SPEED selector button to the setting you want.
STEP 5
Press the FLAP button and set the airflow direction as
desired.
(Refer to "Adjusting the Airflow Direction" on page 21.)
To stop the air conditioner, press the ON/OFF operation button again.
NOTE
When multiple indoor units are used and units in other rooms are already
operating, they will be set to the same mode of operation as the operating indoor
units.
STEP 2
STEP 3
STEP 1
For heating operation
For dehumidifying operation
For cooling operation
30 °C max. or
16 °C min.
→
→
→
86 °F max.
60 °F min.
13