As shown in the figure below, the automatic selection of the operating modes
is determined by the indoor temperature and outside air temperature.
Approx.
Approx.
Approx.
•
When multiple indoor units are used and units in other rooms are already operating,
they will be set to the same type of operation as the operating indoor units.
•
The temperature, airflow direction and fan speed are set automatically but the airflow
direction and fan speed can be changed to suit your individual preference. It will take
a few seconds for the fan speed to be switched.
2. Manual Operation
NOTE
OI-563-13EG
Operation with the Remote Control Unit (continued)
Indoor temperature
Approx.
Approx.
15°C
22°C
22°C
20°C
18°C
Heating operation
Check that the circuit breaker on the power panel is turned on and that
the operation selector of the indoor unit is in the ON position.
Approx.
27°C
Cooling
operation
Drying operation
STEP 2
STEP 3
STEP 1
STEP 4
STEP 5
Temperature setting
(standard)
27°C
20°C to 26°C
24°C
13