Bosch BCM8450UC/03 Use And Care Manual page 27

Rinsing the milk system
● Press E.
● Press [ Rinse milk system ] to select the
program.
● Open door and remove suction pipe from
the milk tube.
● Wipe the suction pipe and insert the end
of the suction pipe into the hole on the
coffee grounds container.
● Close the door. Be careful not to jam the
milk tube.
● Place an empty glass underneath the
beverage outlet.
● Press C.
The milk system is rinsed with water.
● Then empty the glass.
● Press E to exit the program.
Cleaning the milk system manually
Take the milk system apart to clean it:
● Push the beverage outlet down completely
and pull the cover forward to remove.
● Press the snap lever to the left of the
beverage outlet downwards and pull the
beverage outlet forward.
Care and daily cleaning
● Remove the milk tube. Dismantle the top
and bottom sections of the beverage outlet.
● Separate the milk tubes, connecting
element and suction pipe.
● Clean the individual parts with a deter-
gent solution and a soft cloth.
● Rinse all parts with clean water and dry
them.
● Put the individual parts back together
again (see also the quick reference guide).
● Attach the beverage outlet directly from
the front firmly to the three connections.
● Replace the cover.
en
23