Remote Control Feature Programming - Viper 5901 Owner's Manual

Remote control feature programming

The Responder LC 2-way remote control has menus for configuring the
remote control user features and for programming the remote to the
system control module.
Before you start make sure the keypad is unlocked. (See page 14)
To program the remote user features:
Press and hold the
the car indicator at 3 seconds). The status screen clears and "Main
Menu" is displayed in the text display area of the screen.
A U X
Release the
Remote options menu
Options
Remote Setup
Sensor Adjust
Pair Remote
Demo mode
Exit
Press the button to scroll up the Main Menu.
AUX
Press the button to scroll down the Main Menu.
From the Main Menu, once a feature name is displayed in the text
© 2008 Directed Electronics. All rights reserved.
X
A U
button on the remote for about 8 seconds. (ignore
button to display the remote options menu.
Allows feature programming of the remote
Adjusts the onboard impact sensor
Sets up remote for programming to the system
Places remote in demo mode
Exits programming
AUX
Description
35