Viper 5901 Owner's Manual page 52

to the vehicle or glass.
Trigger or Triggered Sequence:
This is what happens when the
alarm "goes off " or "trips." The triggered sequence of your
system consists of the siren sounding and parking lights flashing
for the programmed duration.
Valet Button:
A small push button switch located on your systems control
center. It is used to override the starter interrupt when the remote is lost
or damaged, or to enter or exit Valet Mode.
Warn Away® Response:
Light impacts to the vehicle generate the
Warn Away® Response, which consists of several seconds of horn
honks and flashing parking lights.
Zone:
A zone is a separate input that the alarm can recognize as
unique. Each input to the system is connected to a particular zone.
Often, two or more inputs may share the same zone.
52
© 2008 Directed Electronics. All rights reserved.