Charging The Battery; Low Battery Indicator - Viper 5901 Owner's Manual

➢ Charging the Battery

• Plug in the USB charger (alternately a standard mini USB cable
connected to any standard USB port on any laptop or desktop
computer can also be used (cable not included).
• The LCD displays "CHARGE" while the battery level bars within
the battery icon flash.
• When charging is complete the LCD then displays "FULL".
Note:
If the battery has been severely discharged all remote functions
are disabled for a short charge period. The battery status outline flashes
and CHARGE is displayed on the LCD. Once the battery has accu-
mulated enough charge for functionality, the LCD icons initialize with
a beep sound, the battery status outline stops flashing and the remote
becomes operational while still displaying CHARGE.

➢ Low battery indicator

When the batteries are low on the 2-way remote it emits two groups of
beeps, the battery icon flashes and low battery is indicated, the alarm
then emits an additional chirp upon disarming of the alarm to let you
know its time to change the battery. When the battery is low on the
1-way remote, the remote responds the same way audibly.
Note:
The Arm/Disarm chirps should be programmed ON for the
alarm to emit any additional chirps during disarm. Ask your authorized
dealer if you have any questions.
Sat mode,
bank selector
12
The temperature range over which the
Warning!
battery can be charged is 0ºC TO 45ºC (32ºF
TO 113ºF). Charging the battery at temperatures
outside this range may cause severe damage to
the battery or reduce battery life expectancy.
Bank and
present
indicator
Tune mode
indicator
© 2008 Directed Electronics. All rights reserved.
11:53
Channel
and text
indicator