Battery Replacement; Multi-Car Control Capability - Viper 5901 Owner's Manual

➢ Battery Replacement

Slide the door up to expose the battery beneath the holder. Remove the
expired battery. Place the new battery into the remote control. When
power is returned the remote control is ready for use.

➢ Multi-car control capability

You can operate the 2-way remote control system for two cars, with full
command capability for both vehicles.
To change the Car to be operated:
Two Way Remote
1. Press/hold the
The or
displayed.
2. Change car: While in this mode press the
between cars and the
indicating which car the remote currently operates.
3. Select the car you want to operate and then press any command
to operate the system. The selected car remains selected until the
setting is changed.
One Way Remote
1. Press and hold the
twice indicating current vehicle (one blink = car 1, two blinks =
car 2).
2. To change from one car to the other press the
3. When using the remote to control the system, the amber light will
flash in a sequence of 1 or 2 flashes indicating the current vehicle
selected.
© 2008 Directed Electronics. All rights reserved.
ALL
ALL
AUX
button for 3 seconds or until the remote beeps.
icon flashes and the text "Car 1" or "Car 2" is
or
AUX
button until the amber light blinks once or
ALL
ALL
AUX
button to switch
icon changes accordingly
button again.
AUX
13