Battery Information; Low Battery Alerts; Battery Replacement - Viper 4104 Owner's Manual

Battery Information

The remote controls are powered by 1 coin cell battery (CR-2032)
that can be purchased at most retailers. When the battery begins to
weaken, the operating range will be reduced. The information and
precautions in this section can help maximize your battery's life and
usage in providing you with many years of trouble free operation.

Low Battery Alerts

When unlocking the system using a remote with a low battery the
horn emits one additional honk as an alert. If confirmation honks are
programmed off, the system will still emit one honk as an alert when
unlocking. The optional horn honk feature must be installed.

Battery Replacement

26
1. Using a small slotted
screwdriver, insert into
slot located as shown
and carefully pry the front
of the unit open until front
is completely separated
from housing.
2. Turn both the unit
front and circuit board
over, remove
from clip and replace.
© 2011 Directed Electronics. All rights reserved.
battery