Manual Transmission Vehicles - Viper 5101 Owner's Manual

➤ Manual transmission vehicles

If the vehicle has manual transmission the proper steps must be followed before
leaving the parked vehicle, or the remote start feature is disabled. This process
is called MTS, manual transmission start.
1. While the vehicle is running, put the transmission in neutral.
2. Press the vehicle's foot brake.
3. Apply the emergency brake.
4. Release the vehicle's foot brake.
Note: Pressing the brake again after this step will disable the remote start
feature.
5. Using the remote control, activate the remote start within 15 seconds. The
parking lights flash 5-times confirming that the remote start is active.
6. If the parking lights do not flash 5 times, you have not entered manual
transmission mode and will need to repeat steps 1 thru 5.
7. Turn Off the ignition (the car should stay running when key is turned Off).
8. Exit the vehicle.
9. Lock the doors with the remote. (the vehicle should shut Off when locking
the system).
You can now remote start the vehicle. If a door is opened before the next
remote start activation, the system will not remote start.
To drive your automatic or manual transmission vehicle after it has been remote
started:
1. Get in without stepping on the brake.
2. Insert the ignition key and turn it to the On position.
3. Now, step on the brake.
You have now taken direct control from the remote start system.
22
© 2008 Directed Electronics. All rights reserved.