Table of Contents
Advertisement
3.
Reposition all parts and snap together.
➤ Two car operation
You can use the remote control system for two cars, with full command capabil-
ity for both vehicles.
To change the car selection:
•
Press and hold the
once or twice indicating the current vehicle:
One blink: Car 1
Two blinks: Car 2
•
To scroll from one car to the other, press the
ing the car, operation resumes. The selected car remains selected until the
setting is changed.
© 2008 Directed Electronics. All rights reserved.
2.
Turn both the unit
front and circuit board
over,
remove
from clip and replace.
Note:
Verify that the bat-
tery polarity is correct
when replacing.
A U X
button for 3 seconds until the amber LED blinks
battery
A U X
button again. After select-
11
Hide quick links:
Advertisement
Table of Contents
