Fortinet FortiExtender 201E Quick Start Manual page 5

RF Connectors & System LEDs
LTE Modem 1 RF Connectors
MAIN
Note:
1. The upper LTE LEDs are for LTE Modem 1; the lower LEDs are reserved for future
use.
2. The Management and FortiSASE/LAN Extension LEDs apply to both FEX-201E and
FEX-211E models.
8
AUX GPS
LTE Modem 1
Management
LTE Signal Level 4
LTE Signal Level 3
LTE Signal Level 2
LTE Signal Level 1
Power
FortiSASE/LAN Extension
The following tables describe the use of RF connectors and the system LEDs on top of the
FEX-201E and 211E casing.
RF Connector Description
MAIN Main LTE antenna.
AUX Auxiliary (Diversity) LTE antenna.
GPS GPS/GNSS antenna.
LED Description
LTE Modem 1 Green Steady: Connected to carrier and working properly.
Green Flashing: Booting up and connecting to carrier.
Green Rapidly Flashing: SIM or firmware error.
OFF: No LTE Modem 1.
LTE signal level 1 Green: LTE signal strength <25% (LED 1 on).
LTE signal level 2 Green: LTE signal strength 25%–50% (LED 1 & 2 on).
LTE signal level 3 Green: LTE signal strength 50%–75% (LED 1, 2, & 3 on).
LTE signal level 4 Green: LTE signal strength >75% (LED 1 , 2, 3, & 4 all on).
Power Green Steady: Booted up and working properly.
Green Flashing: Booting up.
Amber Steady: System error.
OFF: No power.
Management Blue Steady: Managed by FortiGate or FortiExtender Cloud.
Blue Flashing: Connecting to a managing device.
OFF: No management connection.
FortiSASE/LAN Blue Steady: The system is connected to FortiSASE/LAN
Extension Extension.
Blue Flashing (at one-second intervals): The system is
connecting to FortiSASE/LAN Extension.
Blue Flashing Rapidly: The system is experiencing an error in
connecting to FortiSASE/LAN Extension.
OFF: The system is not configured for FortiSASE/LAN Extension.
9