Tripp Lite SmartOnline S3MX Owner's Manual page 21

4. Operation
Programs Available List for Parameter 1:
Code Description
01 Output voltage
02 Output frequency
03 Voltage range for bypass
04 Frequency range for bypass
05 ECO Mode enable/disable
06 Voltage range for ECO Mode
07 Frequency range for ECO Mode
08 Bypass Mode setting
09 Maximum battery discharge time setting
10 Reserved
11 Hot standby function setting
12 Neutral loss detection
13 Battery voltage calibration
14 Charger voltage adjustment
15 Inverter A voltage adjustment
16 Inverter B voltage adjustment
17 Inverter C voltage adjustment
18 Output A voltage calibration
19 Output B voltage calibration
20 Output C voltage calibration
21 Charger current setting
22 Charging boards quantity setting
*Y means that this program can be set in this mode.
Note: All parameter settings will be saved only when the UPS shuts down normally with an internal or external battery connection. Normal UPS shutdown
means turning off input breaker in Bypass/No Output Mode.
01: Output Voltage
Interface
No Output mode
Setting
Parameter 3: Output voltage
For 220/230/240V AC models, you may choose the following output voltage:
220: Output voltage is 220V AC.
230: Output voltage is 230V AC (Default).
240: Output voltage is 240V AC.
Bypass / AC
Mode
Y*
Y
Y
Y
Y
Y
Y
Y Y
Y Y
Reserved for future options
Y
Y Y
Y Y
Y Y
Y
Y
Y
Y
Y
Y
Y
Y
21
ECO CVCF Battery
Mode Mode Mode
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Battery
Test
Y
Y
Y
Y