Warranty And After-Service; Specifications - ViewSonic PJ862 User Manual

Warranty And After-Service

Warranty and after-service
If a problem occurs with the equipment, first refer to the "Troubleshooting" and run
through the suggested checks. If this does not resolve the problem, please contact your
dealer or the service company. They will tell you what warranty condition is applied.
Specifications
Specifications
NOTE • This specifications are subject to change without notice.
Item
Product name
Panel size
Liquid
Crystal Drive system
panel
Pixels
Lens
Lamp
Speaker
Power Supply
Power Consumption
Temperature range
Size
Weight (mass)
Ports
Lamp
Optional
Air filter and
parts
the others
Liquid crystal projector
2.0 cm (0.79 type)
TFT active matrix
786,432 pixels (1024 horizontal x 768 vertical)
Zoom lens F=1.7 ~ 2.1 f=24.4 ~ 2.93 mm
230W UHB
3W x 4
AC100-120V/4.0A, AC220-240V/2.0A
370W
5 ~ 35°C (Operating)
336 (W) x 95 (H) x 265 (D) mm
(Not including protruding parts)
• Please refer to the following figure.
3.9 kg
DIGITAL RGB input:
DVI-D ................................... 1
RGB input:
RGB IN1 ..D-sub 15pin mini x1
RGB IN2 ..D-sub 15pin mini x1
RGB output:
RGB OUT D-sub 15pin mini x1
Audio input:
AUDIO IN ........ Stereo mini x1
AUDIO IN L/R ............ RCA x2
Audio output:
AUDIO OUT ... Stereo mini x1
RLC-003
Please consult your dealer or ViewSonic for part information.
Specification
Video input:
COMPONENT VIDEO
(Y, C /P
B B,
S-Video ................................ 1
Video .................................... 1
Communication port:
CONTROL ............ D-sub 9pin x1
USB ....................... USB(B) x1
LAN ........................... RJ45 x1
Other port:
WIRED REMOTE ............... x1
DC OUT ...............................x1
ViewSonic
C /P ) ...... RCA x3
R R
54
PJ862