Multifunctional settings
EASY Menu
With the EASY MENU, items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control. Then perform it referring to the
following table.
Item
ASPECT
MODE
BRIGHT
CONTRAST
COLOR
TINT
SHRPNESS
WHISPER
Using the buttons ◄/► switches the mode for aspect ratio.
See the item ASPECT of section IMAGE menu (
Using the buttons ◄/► switches the mode of picture type. The
modes of picture type are combinations of a mode of GAMMA and
a mode of COLOR TEMP. Choose a suitable mode according to the
projected source.
NORMAL CINEMA DYNAMIC
NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
MODE is "CUSTOM". Please refer to the items GAMMA (
COLOR TEMP (
• When this function is performed, a certain extra such as a line
may appear.
Using the buttons ◄/► adjusts the brightness.
See the item BRIGHT of section PICTURE menu (
Using the buttons ◄/► adjusts the contrast.
See the item CONTRAST of section PICTURE menu (
Using the buttons ◄/► adjusts the strength of whole color.
See the item COLOR of section PICTURE menu (
Using the buttons ◄/► adjusts the tint.
See the item TINT of section PICTURE menu (
Using the buttons ◄/► adjusts the sharpness.
See the item SHARPNESS of section PICTURE menu (
Using the buttons ◄/► turns off/on the whisper mode.
See the item WHISPER of section SETUP menu (
Description
27) of PICTURE menu.
EASY MENU
ASPECT 4:3
MODE NORMAL
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
WHISPER NORMAL
MIRROR NORMAL
RESET
FILTER TIME 0
LANGUAGE ENGLISH
Go To Advance Menu...
29).
26) and
26).
26).
27).
27).
27).
34).
ViewSonic
PJ862
+0
+0
+0
+0
+3
24