ViewSonic PJ1172 User Manual page 37

OPTION Menu (continued)
Item
SERVICE
RESET
Pressing the (or the ENTER) button calls the
SERVICE menu.
SERVICE Menu
Select an item using the
(or the ENTER) button to perform each function.:
FANSPEED  AUTO ADJUST  LENS TYPE  LENS LOCK
FANSPEED Select the fan speed level using the
HIGH  NORMAL
HIGH increases the rotation speeds of fans. Please use
this function in using a projector at high elevations.
Note that the projector is noisier when HIGH is
memo
selected.
AUTO Select ENABLE or DISABLE using the
ENABLE  DISABLE
ADJUST
When you want to keep the current adjustment state,
select a signal change to a RGB signal performs the
automatic adjustment of the vertical position (V
POSITION), the horizontal position (H POSITION), the
clock phase (H PHASE) and the horizontal size (H SIZE).
LENS TYPE Select the lens type currently used using the
buttons.:
AUTO  1  2  3  4  5
Please select depending on the following.
AUTO: automatically selects optimum mode.
1: for a standard lens (Type NL-500 etc.)
2: for a fixed short throw lens (Type FL-501 etc.)
3: for a short throw lens (Type SL-502 etc.)
4: for a long throw lens (Type LL-503 etc.)
5: for a super long throw lens (Type LL-504 etc.)
This setting has an influence on the keystone
memo
distortion etc.
About the optional lens ask your dealer.
memo
LENS Select ENABLE or DISABLE using the
ENABLE  DISABLE
LOCK
Selecting the ENABLE locks the adjustment of the lens
shift, the zoom and the focus.
Select EXECUTE using the
items.:
EXECUTE  CANCEL
The items of the OPTION menu are collectively returned to the initial
setting. Note that the items "VOLUME", "LAMP TIME" and "FILTER TI
ME" are not reset.
Description
buttons, and press the
/
button to reset the OPTION menu
buttons.:
/
/ buttons.:
/
/ buttons.:
ViewSonic PJ1172 32