Connecting the PC
USB Connections
Note
1
Check that the device power supply is turned OFF.
Setup requires computer administrator privileges.
This section described the operating procedure for
Windows 7 unless otherwise specified. The screens and
operating procedure may differ depending on the OS.
Setup Flow
2
Turning ON the PC power supply
Installing the printer drivers
Turning ON the device power supply
3
1
Turn ON the PC power supply to start
Windows.
Memo
When the device power supply is turned ON, the
"Add new software wizard" may be displayed in the
4
screen. If this happens, click "CANCEL", and then
turn OFF the device beore proceeding to the next
step.
2
Insert the "Software DVD-ROM" into the
PC.
3
When the "AutoPlay" window is
displayed, click [Run Setup.exe].
4
When the "User Account Control"
window is displayed, click [Yes].
5
Read the "Software License Agreement",
and click "Agree".
6
Read the "Environmental advice for
Users", and click [Next].
7
Select the printer model to be used,
and click [Next].
8
Select "USB connection", and click
[Next].
- 66 -