Oki C942 User Manual page 63

„ Setting the Device Network
Memo
⿟ If you have set up the IP address for this printer by
following Steps 1~14 in "Installer Printer Drivers
(Windows)" (P.59), then skip this section.
1
Check that the device and PC are
connected, and that the power is turned
ON, and then insert the "Software DVD-
ROM" into the PC.
2
When the "AutoPlay" window is
displayed, click [Run Setup.exe].
3
When the "User Account Control"
window is displayed, click [Yes].
4
Read the "Software License Agreement"
thoroughly, and click [Agree].
5
Read the "Environmental advice for
Users", and click [Next].
6
Set the printer model to be set, and
click [Next].
7
Select [Network connection], and click
[Next].
8
Click [Device Network Setup].
9
The printer search will start. Select the
device from the table when the printer
has been detected, and click [Next].
10
Enter the network setup information,
and click [Setup].
11
Enter the network setup password, and
click [OK].
- 63 -
Connecting the PC
1
2
3
4