the throttle lever to the rearmost position, then
the engine will kill.
⚫
Blade Drive Lever: Push the mower blade drive
lever forward to the engage position. Pull the
mower blade drive lever backward to the
disengage position to stop the blades.
⚫
Hand actuated operator presence lever: When in
normal operation, hold the operator presence
lever down. When released, engine will kill.
⚫
Steering Brake Levers: While squeezing the
steering lever handles with both hands, release
right and left neutral latches; then release right
and left steering levers to move forward. When
the steering levers are released, the mower will
travel straight forward. To make a right turn,
squeeze the RH steering lever. To turn left,
squeeze the LH steering lever. Squeeze both
steering levers, lock right and left neutral latches,
and the mower will stop.
⚫
Neutral Latches: Located on bottom of the
handles. They are used to lock the steering levers
when stopping.
⚫
Gear shift lever: Used to shift the transmission
from neutral into one of 3 forward gears.
⚫
Fuel shut-off valve: The fuel shut-off valve is
used to shut off the fuel when the machine will
not be used for a few days, during transport to
and from the jobsite, and when parked inside a
building.
2.7 Accessories:
a) Grass catcher assembly (2832200): 80L, see FIG 2
b) Mulching Assembly (2832010): See FIG 3
2.8 Approximate Dimensions:
2.8.1 Width:
Without
Model
Deck
28inch
EW32
71.1cm
2.8.2 Overall Length: 67.3in(171.0cm)
2.8.3 Overall Height: 42.9in (109.0cm)
2.8.4 Tread:
⚫
Drive Wheel Tread: 22.6in(57.6cm)
⚫
Caster Wheel Tread: 20.6in(52.3cm)
2.8.5 Wheelbase:
⚫
31.9in(81cm)
2.8.6 WY32S Net Weight: 305lbs(139Kg)
2.9 Torque Requirements
⚫
Cutter Housing Spindle Nut: 66± 13ft-lb
(90±18N-m)
⚫
Engine Deck/Front Frame Mounting Bolts:
40-52ft-lb (55-70 N-m)
7
FIG 2
FIG 3
Discharge
Discharge
chute up
chute down
32.8 inch
41.3 inch
83.4cm
104.9 cm