Ricoh FT5034 Service Manual page 36

3. Exposure Lamp Positioning
CAUTION: Be sure that the main switch is
turned off before adjustment.
1. Remove the exposure glass.
2. To correct the position of the filament in
parallel with the sight hole, turn the
adjusting screw.
NOTE: 1. Do not adjust vertically using
the adjusting knob.
2. If the adjustment is incorrect,
uneven image density or dirty
background will appear on the
copy image.
4. 2nd and 3rd Mirror Replacement
Front Spring
Plate
1. Remove the front spring plate.
2. Carefully pull the mirror towards the front.
NOTE: Be careful not to drop rear spring plate.
2nd Mirror
Exposure
Lamp
- 35 -
Reflector Cover
Adjusting Screw
Filament
Rear Spring Plate
2nd Mirror