Turning On The Power; Moving The Appliance For Relocation - LG GF-V Series Owner's Manual

global_main.book.book Page 17 Thursday, November 19, 2020 10:52 AM
3
Use the spanner to fasten the keeper nut by
a
turning it to the right.
NOTE
• Levelling the doors may not be possible when
the floor is not level, or is of weak or poor
construction.
• The refrigerator is heavy and should be installed
on a rigid, flat and solid surface.
• Some timber flooring may cause levelling
difficulties if it flexes excessively.
Door Alignment for Left Fridge
Door
Open the fridge door and use the spanner
rotate the door hinge bolt.
Door Alignment for Right Fridge
Door
Adjust the left fridge door first.
If the door is too low, lift the right door up and use
a pair of long nose pliers to insert C-Clips until both
doors are level.

Turning on the Power

Connecting the Appliance
After installing the appliance, connect the power
plug into the outlet socket.
NOTE
• After connecting the power supply cord (or plug)
to
c
to the outlet, wait 3 or 4 hours before you put
food into the appliance. If you add food before
the appliance has cooled completely, your food
may spoil.
Moving the Appliance for
Relocation
Preparing for Relocation
1
Remove all food from inside the appliance.
2
Pull the power plug out, insert and fix it into the
power plug hook at the rear or on top of the
appliance.
3
Tape parts such as shelves and the door handle
to prevent from falling off while moving the
appliance.
INSTALLATION
17