Turning On The Power; Moving The Appliance For Relocation - LG GT51SGD Owner's Manual

Table of Contents

Advertisement

1
Turn the levelling leg clockwise to raise that
side of the appliance or counterclockwise to
lower it.
2
Open the doors and check to make sure that
they close easily.
NOTE
• Leveling the doors may not be possible when the
floor is not leveled, or is of weak or poor
construction.
• The refrigerator is heavy and should be installed
on a rigid and solid surface.
• Some timber flooring may cause levelling
difficulties if it flexes excessively.

Turning on the Power

Earthing Instructions
This information is applicable to some countries
only where an earth connection is required.
It is recommended to install an earth wire to
prevent electric shock.
• Connect the earth wire
back of the appliance and the wall outlet
to the screw
on the
a
b
.
c
WARNING
• Do not connect the earth wire to gas pipe, water
pipe, water tap, telephone earth wire, and
lightining rod.
NOTE
• When you install the appliance in a humid or wet
location, you must install the earth wire. You are
obligated by law to install a circuit breaker in
addition to the earth wire. Make sure your
appliance is properly installed and earthed by a
qualified technician.
• Consult with your retailer or a qualified
technician before installing an earth wire. You
may be charged for the installation.
Connecting the Appliance
To turn on the appliance, connect the power plug
into the outlet socket. Do not double up with other
appliances on the same outlet.
NOTE
• After connecting the power supply cord (or plug)
to the outlet, wait 3 or 4 hours before you put
food into the appliance. If you add food before
the appliance has cooled completely, your food
may spoil.
• To turn off the appliance, disconnect the power
plug from the outlet socket.
Moving the Appliance for
Relocation
Moving the Appliance
1
Remove all food from inside the appliance.
INSTALLATION
13

Advertisement

Table of Contents
loading

Table of Contents