Product Registration - Frigidaire FPID2497RF Use & Care Manual

Table of Contents

Advertisement

Thank you for choosing Frigidaire
This Use & Care Guide is part of our commitment
to customer satisfaction and product quality
throughout the service life of your new appliance.
We view your purchase as the beginning of a
relationship. To ensure our ability to continue
serving you, please use this page to record
important product information.
_________________________________
Purchase Date
_________________________________
Model Number
_________________________________
Serial Number
Registering your product with Frigidaire enhances
our ability to serve you. You can register online
at www.frigidaire.com or by dropping your
Product Registration Card in the mail.
NOTE
The dishwasher is programmed to remember
your last cycle so you do not have to reset each
time. To start the dishwasher using the same
cycle and options selected on the previous wash,
just press the START/CANCEL pad.
NOTE
Not all cycles and options are available on all
models.
NOTE
Why Energy Effi cient Units run long cycles:
Several factors are important to washing dishware.
The energy use of the dishwasher was reduced
by applying more of the factors that don't use so
much energy and less of the ones that use more.
As a result, you will see that the wash cycles take
longer.

PRODUCT REGISTRATION

NOTE
Very Important Information - Read
Before Operating Your Dishwasher!
Normal Operating Sounds
This dishwasher does not sound like most
dishwashers - IT'S QUIETER.
Your Direct Feed Wash System dishwasher uses
energy effi cient motors for the wash and drain
portions of the cycle you select. Each cycle has
a series of water fi lls and drains for washing and
rinsing dishes. As each cycle begins, you may-or
may not- hear the drain motor. The next sound
you will hear is the splashing water as it enters the
tub.
PLEASE BE ADVISED: If you compare this
dishwasher to previous models, you may be
surprised at what you DON'T hear.
Operating Instructions
Getting Started
1. Load Dishwasher (See Preparing and Loading
Dishes).
2. Add detergent (See Dishwasher Dispenser &
Detergents).
3. Add Rinse Aid, if needed (See Rinse Aid).
4. Run hot water faucet nearest dishwasher until
water is hot. Turn water off.
5. Select desired CYCLE (See Cycle Chart).
6. Select desired OPTION (See Options
Selections).
7. To start, press START/CANCEL pad and close
door immediately.
CAUTION
Property Damage Hazard
Before starting dishwasher be sure that the water
is connected and turned on. Failure to do so
may cause damage to the pump seal and result
in water leakage.
3

Advertisement

Table of Contents
loading

Table of Contents