Table of Contents
Advertisement
Available languages
Available languages
26
USING YOUR WASHING MACHINE
Set the drying time,
Drying options are easily selected with the DRY
button. For most even drying, make sure all articles
in the clothes load are similar in material and
thickness. Do not overload the washer by placing
too many articles into the drum. Items must be
able to tumble freely. If you open door and remove
load before washer has finished the DRY cycle,
remember to press the START/ PAUSE button.
By pressing the DRY button, you can select:
1 LOW TEMP - For delicate fabrics
2 DAMP - For damp drying fabrics
3 NORMAL - For general drying
4 MORE - For heavier fabrics
5 TIME - For timed drying
NOTE
y Your washer can handle a load of up to 19 lbs. (8.5
kg) dry weight of articles.
y The Cool Down is set automatically when drying
cycle is complete.
y If clothes are not removed promptly when the drying
cycle ends, wrinkles can form.
Drying Guide–Automatic Dry
Electronic sensors measure the temperature of the
exhaust to increase or decrease the drying
temperature for faster reaction time and tighter
temperature control.
Recommended DRY settings by fabric type:
a) Perm Press – LOW TEMP
b) If clothes are to be ironed – DAMP
c) Cotton/Towels – NORMAL
d) Diapers – MORE
NOTE
y On Automatic Dry settings, the estimated drying
time may vary from the actual drying time. The type
of fabric, size of the load, and the selected dryness
level affect drying time.
Drying Guide–Timed Dry
• Press the Dry button repeatedly to select the
drying time in 30 minute increments:
30–60–90–120 minutes.
• Timed dry can last up to 120 min. When selecting
Dry only, drying will start after the final Spin
cycle.
• Drying times can vary greatly depending on
dampness, room temperature, and type of fabric.
You may need to add additional time. Your own
experience will be your best guide.
Dry
Drying Tips
Woolen Articles
Do not tumble dry woolen articles. Pull them to
their original shape and dry them flat.
Woven and Loopknit Materials
• Some woven and loopknit materials may shrink
when dried.
• Always stretch them out immediately after
drying.
Permanent Press and Synthetics
• Do not overload your dryer.
• Take out permanent press articles as soon as the
dryer stops to reduce wrinkles.
Fiber or Leather Materials
Always check the manufacturer's instructions.
Baby Clothes and Night Gowns
Always check the manufacturer's instructions.
Rubber and Plastics
Do not dry any items made from or containing
rubber or plastics, such as:
a) Aprons, bibs, chair covers
b) Curtains and table cloths
c) Bathmats
Fiberglass
Do not dry fiberglass articles in your dryer. Glass
particles left in the washer could be picked up by
your clothes the next time you use the washer and
irritate your skin.
Presetting the start time,
You can set the desired start time.
1
A
B
Press
and turn
2
Press the desired option to use the other
options.
3
Press
repeatedly to select the desired
start time.
-
light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay
time by one hour, up to 19 hours.
C
4
Press
.
DELAY WASH
to the desired cycle.
Advertisement
Table of Contents
