Table of Contents
Advertisement
•
Max size of memory bank
•
- Select to apply the configuration changes.
Apply
Filter Settings
Use the sample application's filter settings to set filters for tag reading. The application supports up to two pre-filters
and two post-filters. By default, the window displays the latest filter information. Add or delete the filter by selecting
.
Use Filter
Pre-Filter
To select pre-filter settings, select
Pre-Filter Window
Figure 4-10
This window includes the following fields:
•
- Selecting an antenna ID updates the configuration values in the other fields.
Antenna
•
- Select the memory bank.
Memory Bank
•
- The first (msb) bit location of the specified memory bank against which to compare the tag mask.
Offset
•
- The pattern against which to compare the specified memory bank.
Tag Mask
•
- Select the required filter action. For more information, refer the Gen2 specification available at
Filter action
http://www.epcglobalinc.org/standards/.
- Storage to allocate for the memory bank's data.
Operations > Filter > Pre-Filter
RFID Sample Application [TBD]
.
4 - 7
Advertisement
Table of Contents
