Table of Contents
Advertisement
2 - 2
MC319Z RFID Mobile Computer Integrator Guide
On the mobile computer, navigate to the
5.
update takes approximately 10 minutes. Do not remove AC power during this time.
Copy the contents of
6.
mobile computer.
Remove the mobile computer from the cradle or AC power if fully charged.
7.
On the mobile computer, navigate to the
8.
The device boots after the installation. Note that the RFID LLRP application disconnects when the mobile computer
is charging, and re-connects when the mobile computer is removed from AC power.
Updating Images via AirBEAM
Install the AirBEAM package files within
1.
30XXw61MenUPRXXXXX.apf
2.
30XXw61RFIDPkgXXXX.apf
30XXw61RFIDPkgXXXX.apf
approximately 7-10 seconds. Refer to the MC3000 Integrator Guide for more information on AirBEAM.
NOTE If you exit LLRP via the icon menu, to restart it use File Explorer on the mobile computer to navigate to
\Application\LLRP\ and tap the MobileLLRP.exe application.
Updating the RFID Firmware
Use the RFID_FLASH utility to update the firmware for the RFID radio. Motorola distributes the firmware and OEM
update files on the Support Central Web Site http://www.motorola.com/enterprisemobility/support.
CAUTION
Downloading Firmware Files
Download the firmware update files from the Motorola Support Central web site
1.
http://www.motorola.com/enterprisemobility/support
Connect the mobile computer to the host computer using ActiveSync.
2.
In ActiveSync on the host computer, open Explorer for the mobile computer.
3.
Copy the firmware file and the OEM data file into the
4.
\Storage Card
30XXw61RFIDPkgXXXX
\Storage Card
30XXw61RFIDABxxxxx.zip
executes silently and the mobile computer boots after installation, which takes
When upgrading the firmware, Motorola recommends placing the mobile computer in a cradle with
external AC power connected. An interruption in the firmware update, e.g., due to loss of power, can
render the RFID module inoperable.
folder and tap the program
(the files only, not the folder) into the
folder and tap the program
in sequence:
to a host computer.
folder on the mobile computer.
\Application
. The
STARTUPDLDR.EXE
folder on the
\Storage Card
RFIDSetup.exe
Advertisement
Table of Contents
