Table of Contents
Advertisement
Using Caller ID service
Important:
R This unit is Caller ID compatible. To use Caller
ID features (such as displaying caller phone
numbers), you must subscribe to a Caller ID
service. Contact your phone service provider for
details.
For New Zealand
R For all local and national incoming calls, your
display will show the area code (e.g. 09 for
Auckland) or the mobile prefix (e.g. 027 for
Telecom Mobile) followed by the caller's
telephone number. An Auckland caller's number
will be displayed as 09XXXXXXX. The seven
X's represent the seven digits of the caller's
telephone number. A caller from a 7-digit
Telecom Mobile number will be displayed as
027XXXXXXX. For incoming international calls,
your display may only show "0000".
For business users on a Centrex line, your
display will show Centrex extension numbers in
the shorter extension number format used within
your company.
R The Caller ID information will not be presented
on incoming fax calls if Telecom FaxAbility is
used.
Using toll services from Telecom or another
company (for New Zealand)
Your telephone company may charge you for a
local call if the number dialled has the area code
prefix included. If this is unacceptable, dial only the
7-digit local number. Do not dial the "0" prefix or
the area code.
Caller ID features
Handset / Base unit
When an outside call is being received, the caller
information is displayed.
Caller information for the last 50 callers is logged
in the caller list from the most recent call to the
oldest.
R If the unit cannot receive caller information, the
following is displayed:
– "Out of area": The caller dials from an
area which does not provide a Caller ID
service.
– "Private caller": The caller requests not
to send caller information.
R If the unit is connected to a PBX system, caller
information may not be properly received.
Contact your PBX supplier.
Missed calls
Handset / Base unit
If a call is not answered, the unit treats it as a
missed call. The display shows "Missed call".
Note:
R Even when there are unviewed missed calls,
"Missed call" disappears from the standby
display if the following operation is performed by
one of the units:
– A handset is replaced on the charger.
– Pressing MOFFN on a handset.
– Pressing MEXITN on the base unit.
Phonebook name display
When caller information is received and it matches
a phone number stored in the phonebook, the
stored name in the phonebook is displayed and
logged in the caller list.
Call waiting and Caller ID compatible
(for Australia)
Handset / Base unit
If you subscribe to Caller ID service, your base
unit or handset displays the 2nd caller's
information while talking. After you hear a call
waiting tone, the caller's phone number will be
displayed.
You can answer the 2nd call, keeping the 1st call
on hold. Follow your phone service provider
instructions using MCALL WAITN. (Recall function)
R If the phone number is stored in the phonebook
with its name, the caller's name will also be
displayed.
R Please contact your phone service provider for
details and availability in your area.
For Caller ID Type II users
When you receive a 2nd call during a
conversation, you will hear a signal tone following
the call waiting tone and the conversation will be
interrupted or muted for a short period of time.
This is not a fault of the product as these events
are normal.
R The tones are generated by your phone service
provider.
Caller ID Service
49
Advertisement
Table of Contents
