Table of Contents
Advertisement
Link to Mobile
Important:
R When 3 Bluetooth devices (2 mobile phones
and 1 headset) are paired to the base unit, only
2 Bluetooth devices can be used with the unit at
the same time, and the base unit loses its
connection from other Bluetooth devices. To
automatically resume the connection to
Bluetooth devices, leave the auto connection on.
R Some mobile phones lose connection after
usage, please check the specifications of your
mobile phone for more details.
Handset / Base unit
1
MMENUN#632
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R Some mobile phones may ask you if you accept
the connection requirement from the base unit.
In that case, select "Off" in step 2. Check the
specifications of your mobile phone.
Connecting/disconnecting the mobile phone
manually
If you will not be using the paired mobile phone's
link to mobile feature temporarily (for example, you
do not want the unit to ring when your mobile line
receives a call), you can disconnect your mobile
phone from the base unit. If you want to use it
again, reconnect the mobile phone to the base unit.
You can configure this setting using either the
base unit or one of the handsets.
Note:
R After you disconnect a paired mobile phone
from the base unit manually, it will automatically
be connected to the base unit in 30 minutes. If
you do not use the link to mobile feature
anymore, unpair the mobile phone (page 17).
R A disconnected mobile phone is not unpaired
from the base unit, so pairing it to the base unit
again is unnecessary.
Handset / Base unit
1
To connect/disconnect:
For MOBILE 1: MMENUN#6251
For MOBILE 2: MMENUN#6252
R A long beep sounds.
18
2
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Mobile line only mode (If you do not
use the landline)
If you do not use the landline, we recommend
setting the unit to the mobile line only mode.
The default setting is "Off".
You can configure this setting using either the
base unit or one of the handsets.
Important:
R If you turn on the "Mobile line only
mode", disconnect the telephone line cord from
the base unit. Otherwise the "Mobile line
only mode" cannot be activated.
Handset / Base unit
1
MMENUN#157
2
To turn on:
MbN: "On" a MSELECTN a MbN: "Yes" a
MSELECTN
To turn off:
MbN: "Off" a MSELECTN
Note:
R Once you set this mode, you can use the
following buttons to make mobile calls:
– for the handset, press M
MMOBILEN (page 20).
– for the base unit, lift the corded handset or
press MZN without pressing MMOBILE 1N or
MMOBILE 2N set for the mobile line selection
(page 19, 24).
R Once you set this mode, the following features
cannot be used:
– Landline features (page 43)
– Answering system (page 58)
Messages cannot be received.
– Voicemail features (page 65)
R After this mode is turned on or off, the base unit
reboots.
– Bluetooth connections from mobile phones or
headset are disconnected. If the auto
connection is turned on (page 17), the mobile
phones are reconnected.
–
will be displayed on the handset
momentarily. The handset can be used once
is displayed.
N or MZN instead of
Advertisement
Table of Contents
