Changing The Handset Ring Type And Ring Volume (H/O 200); Changing The Handset Earpiece Volume (H/O 200) - Uniden H/O 100 Owner's Manual

36

Changing the Handset Ring Type and Ring Volume (H/O 200)

There are 2 ring types and two ring volumes that can be selected while your
H/O 200 is in the Standby mode. Be sure the talk/batt low LED is not lit on your
H/O 200 Handset.
1. Press the volume/ringer key on the Handset to change between the 2 different
rings and volumes.

Changing the Handset Earpiece Volume (H/O 200)

1. While on a phone call, press the volume/ringer key on the Handset.
2. You will hear a tone indicating a decrease in the earpiece volume.
3. Press the volume/ringer key again to increase the earpiece volume to the
higher level.